Star Hydraulics & Pneumatics, LLC.
Star Hydraulics & Pneumatics, LLC.
2727 Clinton St.
River Grove, IL 60171
Phone: 708.453.3238
Fax: 708.453.0297
Email: sales@starhyd.com
Website: www.starhyd.com
Print Back
Without Oil Reservoir
Without Adjustable Overload Relief Valve
Without Manual Pressure Release Valve

These pumps, either base or flange mounted style, have only check valves. They have no reservoirs, overload, relief, or release valves, and are used on equipment that has its own reservoir and control valves. These pumps provide a low cost efficient means for manually developing or increasing pressure in a hydraulic system. In emergencies they furnish reliable hydraulic power to operate presses, valves, doors, safety locks and other devices.
  • Maximum pressure 10000 PSI
  • Pistons ground and hard chrome plated
  • All steel pump bodies
  • 24" operating lever included with hand pump
  • Stainless steel models available
Unit of Measure

Specifications

Mounting

 N/A Base Mounted

Series

 N/A SP

Oil Reservoir

 N/A false

Adjustable Overload Relief Valve

 N/A No

Manual Pressure Release Valve

 N/A No

Body Material

 N/A Steel

Piston

 N/A Hard Chrome Plated
Maximum Pressure Rating1 N/A 1500 psi

Piston Diameter

 N/A 1 1/4 in

Volume per Stroke

 N/A 1.84 in³

Lever
Load per 100 PSI

 N/A 7.7 lb
Inlet Port Size (NPTF)2 N/A 3/8

Outlet Port Size (NPTF)

 N/A 3/8

Net Weight

 N/A 10 lb

Operating Lever Size

 N/A 24 in

Technical Information

N/A

    Limited Warranty

    All Star pumps are covered by a limited warranty on materials and workmanship for one year from the date of manufacture. Star will repair or replace at its option any pump in which Star finds manufacturing defects. In order to get warranty service a pump must be returned to the Star plant freight prepaid with a written explanation of the problem.

    Technical Data

    Light hydraulic oil is recommended for use with Star pumps. Oils with SUS viscosity of 75 to 150 at 100 degrees Fahrenheit will give satisfactory performance (ISO grade 15, 22, or 32). In an emergency situation when the above oils are not available, use 5 W or 10 W motor oil or automatic transmission fluid.
    All exposed surfaces of standard Star pumps are painted with one coat of industrial quality paint. Pumps painted with special colors with two coat finishes, or with prime coat only, and pumps with special plated or polished parts, are also available.
  • 1 These pumps have no overload relief valve and will exceed maximum rated pressure if too much force is applied by the operator. System designer must provide overload relief protection for system if required.
  • 2 PL Pumps do not have threaded inlet ports. They must be gasket mounted to reservoir.