Star Hydraulics & Pneumatics, LLC.
Star Hydraulics & Pneumatics, LLC.
2727 Clinton St.
River Grove, IL 60171
Phone: 708.453.3238
Fax: 708.453.0297
Email: sales@starhyd.com
Website: www.starhyd.com
Print Back


Without Oil Reservoir
Without Adjustable Overload Relief Valve
Without Manual Pressure Release Valve

These pumps, either base or flange mounted style, have only check valves. They have no reservoirs, overload relief, or release valves, and are used on equipment that has its own reservoir and control valves. These pumps provide a low cost efficient means for manually developing or increasing pressure in a hydraulic system. In emergencies they furnish reliable hydraulic power to operate presses,

more
Unit of Measure

Specifications

Mounting

 Flange Mounted

Series

 SP-PL

Oil Reservoir

 false

Adjustable Overload Relief Valve

 No

Manual Pressure Release Valve

 No

Body Material

 Steel

Piston

 Hard Chrome Plated
Maximum Pressure Rating1 1000 psi

Piston Diameter

 1 1/2 in

Volume per Stroke

 2.65 in³

Lever
Load per 100 PSI

 11.0 lb
Inlet Port Size (NPTF)2 3/8

Outlet Port Size (NPTF)

 3/8

Net Weight

 10 lb

Operating Lever Size

 24 in

Technical Information

N/A Limited Warranty

      All Star pumps are covered by a limited warranty on materials and workmanship for one year from the date of manufacture. Star will repair or replace at its option any pump in which Star finds manufacturing defects. In order to get warranty service a pump must be returned to the Star plant freight prepaid with a written explanation of the problem.


Technical Data

      Light hydraulic oil is recommended for use with Star pumps. Oils with SUS viscosity of 75 to 150 at 100 degrees Fahrenheit will give satisfactory performance (ISO grade 15, 22, or 32). In an emergency situation when the above oils are not available, use 5 W or 10 W motor oil or automatic transmission fluid.

    All exposed surfaces of standard Star pumps are painted with one coat of industrial quality paint. Pumps painted with special colors with two coat finishes, or with prime coat only, and pumps with special plated or polished parts, are also available.
  • 1 These pumps have no overload relief valve and will exceed maximum rated pressure if too much force is applied by the operator. System designer must provide overload relief protection for system if required.
  • 2 PL Pumps do not have threaded inlet ports. They must be gasket mounted to reservoir.